How to set up and optimize your wireless router can be a pleasant experience. The great thing is most manufacturers have made it easier even if you are not technically inclined. The good news is the majority of new wireless router’s ports have clear labeling, making it easier for you to connect.
You can also check out this: Best Location to Put Wireless Router
Some even take it a step further and color code the ports for you. Further, they come with preset configuration and app-based setup. However, this does not mean that once plugged in and set up everything runs smoothly. Neither does this mean the home network performance nor is security at its best?
Here are some essential steps to follow to put together your router to get it working at its best.
Check this for TIPS TO HELP IMPROVE YOUR WIRELESS NETWORK
Steps to Follow to Set Up and Optimize Your Wireless Router
Before you can even think about the setup and optimization of your router, you need the right model. So if this is your first time in buying one do your research. An excellent starting point is with our directory of the best wireless routers you can buy online.
The only problem you might have is if you have an older model only supporting Wireless Equivalent Privacy for security – this support is not very secure anymore. If this is the case, it is time to update your router. If you have, a router supplied by a large ISP the problem you might face is that the device does not offer loads of features.
They can even make it hard for you to get entry to the configuration page and ask you additional costs when using certain features. So make sure. If this is the case, the best options to obtain your own Wi-Fi router.
1. Get Your Network Online
Once you have your Wi-Fi router, it is time to get your network online. If you have received a modem from a service provider the set up is straightforward. You can follow these basic steps:
- Start by turning off the modem and unplug the Ethernet cable on the PC.
- Take the Ethernet cable and connect it to your new router via the internet port or Wide Area Network.
- Now power up your modem and wait for 2-minutes.
- you can power up the router and wait for 2-minutes.
- connect your PC to the router’s LAN port with another Ethernet cable.
2. Power Up Your Computer
The latest devices are set up for DHCP and automatically assign you an Internet Protocol address. If this is the case, you ought to be online. However, when utilizing an Internet Service Provider router and not a modem, this can become problematic. You will have to reconfigure the supplied router and use it in the joined mode before connecting it to the new wireless router.
What this means is the original router does nothing your network traffic. It only passes along a signal to the new one. Although, it is possible for you to set it up yourself you can ask the supplier to do it. Once the supplied routers in conduit mode, you can follow the previously mentioned actions to get the new Wi-Fi router online.
3.Getting into the Admin Console
Everything is connected and up and running. Now you can start customizing and configure the router. These days the hardware manufacturers make it easier for you. They provide you a mobile application or Web Interface.
This already includes the IP address, manager account, and your password. The IP address varies from one supplier to another. If you want to know what your IP address is, you can check it in the documentation.
- Start by launching the browser on your PC
- Enter the IP address supplied by the manufacturer (ex. 18.104.22.168) in the browser and push enters.
- The router’s login screen should pop up requesting the default login information. Following the completion of this section, push enters. On your screen, you will see the administration console displayed.
4.Upgrade the Firmware and Change the Password
The first and important thing is to change the password. Using the default one can compromise your network security and leaves your device exposed. Make sure the router has the most recent firmware and best to upgrade it. With the latest software updated, it can prevent probable issues before they start.
5.Dynamic Host Configuration Protocol
The next point is to get your router’s LAN organized. All that Dynamic Host Configuration Protocol means is it manages all IP address available on your home network. The device uses the Internet Protocol address as an identification, to establish your connected device.
If there is no IP address present on the PC or smart device, you will have to ask for an address from the DHCP server. What happens is the DHCP provides you with an address available in the pool and allocates it to your device.
Once the gadget disengages from the network this, IP address is sent back to the Dynamic Host Configuration Protocol pool. When connecting a printer or server to the network it needs to utilize the same Internet Protocol address all the time. Now you must allocate a stationary IP address that does not return to the DHCP scope and assigned permanently.
Setting the DHCP Scope:
- Access the administration console and find the LAN Setup. You will see the LAN IP address displays along with DHCP servers.
- Here you can allocate a collection of an Internet Protocol address for the Dynamic Host Configuration Protocol server. For example, if it is 22.214.171.124 and needs to allocate 20 IP addresses, you would start with 126.96.36.199 and end with 188.8.131.52.
Once the static addresses are set up, you need to assign them manually to the device in need of one. What you will do is assign each device network adapter with its own IP address, Subnet Mask, Gateway and the Domain Name System server address.
Based on our previous example, you can use any address between 184.108.40.206 and 220.127.116.11 for the Internet Protocol address. Further, you can use the 18.104.22.168 for the Subnet Mask. The Domain Name System and Gateway address remain identical as the routers Internet Protocol address.
Always make sure to keep track of the fixed IP addresses you have assigned not to get confused. Always check your included documentation when applying addresses to different devices.
6.Getting your Wireless Connection Activated
Now that your networks put together, you can start to setup the wireless network. Your computer needs a connection using an Ethernet cable to the network.
- Access the router’s admin console and find the Wireless Setup. Normally this is set up, but in the case, it is not you need to switch it on.
- Depending on the router, you have: with a dual-band model, check the settings for the 2.4GHz frequency and the 5GHz frequency. You need to configure both separately.
- Check that the channels set to automatic while leaving the mode unchanged. If you do experience a drop connection, you are able to adjust this when it happens.
- Change the SSID name to anything you prefer by giving each frequency a unique name.
- Now you need to set up the encryption and best to use the WPA2 one. For the highest level of security, select the WPA2-PSK one. Some models might still offer you the WEP one. Once assigned set the passcode and must be 8 to 63 characters and comprise of upper/lowercase letters, numbers, and unique characters.
All you still have to do is save the alterations and test out your network connection.
Now that you know how to set up and optimize your wireless router, it is time to start sharing data. The best way to accomplish this is with a server. You can consider using a Network Attached Storage device. Alternatively, the latest routers have a USB port included to connect external devices for sharing information to printers and hard drives. We hope you found our article helpful and that you get the best out of your wireless connection.