There is nothing more annoying than a video buffering when you want to view it online. How many times has this happened to you? If this has happened often, the chance is your wireless routers’ connected the wrong way.Many experts have different ways of connecting a Wi-Fi Router. The important thing is you need the best Location to Put Wireless Router. Once you have found the right spot in your apartment, home, or office buffering is not a problem anymore.
You can also check out this: How to Set Up and Optimize Your Wireless Router
So where do you place the router to get the best Wi-Fi connection? We have the answer here! You need to test and test to find out the best place to keep the signal strong. The important thing is for the best performance your home network depends on the signal strength of the wireless router.
No matter if you are in the range of the base station signal or boundary of the network range if the routers’ not placed correctly you will experience a dropped connection. So if you want to get your wireless router sending out the best-broadcast range read further on how we can help you achieve this.
Where to Place Your Router to Get the Absolute Best Wi-Fi Connection
One of the most challenging tasks in your house is locating the best wireless signal to reach all parts of the home. The task is even more difficult if the house is huge and has many thick walls. Here we have a couple of ideas you can do to help improve your wireless coverage.
The first few tips will cost you nothing only a bit of your time.
Location to Put Wireless Router
Finding the right spot
A router transmits wireless signals in every direction. When thinking about the signal imagine it is an orb with the wireless router placed in the middle of it. Outside the orb, users will not find a signal, as the orbs not round the signals tweaked to disperse parallel than perpendicular.
Similar to radio frequency they spread crossways and descending, the farther it is from the transmitter. With this picture in your mind, the best spot to place the router is to raise it in the middle of the home.
The best way to do this is to use a coax cable or telephone jack the near middle of the home. If your home has more than one floor, preferably, place it on the 2nd floor to connect to the modem and the wireless router. This may cost you a little extra to place a new power point in the correct place.
If you are not able to use a coax cable or move the phone jack where needed, you can use a lengthy network cable to join the device to the modem. The truth is a Wi-Fi signal works better outside than indoors. The problem is you cannot place your router outdoors.
You need to make sure the surrounding area of the router is clear from obstacles. The best spot is to position the device in midair. The 2nd paramount thing is to place it on a flat service or secure it on the wall. If you have a router with peripheral antennas, you can tweak them by orientating them upright if you need a wide signal.
However, if the signal needs to reach the basement up to the highest floor, position the antennas at a horizontal angle. There are certain routers that offer you detachable antennas. This you can substitute with bigger antennas to help increase coverage.
The problem comes when the router has internal antennas. Some models do have powerful antennas with Beam-forming that automatically directs the signal to connected clients.
Still no signal
If you still do not have any improvement after placing the router in the correct spot, you need to test the equipment. Here you will have to spend a bit of money.
If you have a smaller home, the routers’ placed in the central point of the house, and it is still not covering every corner – think about replacing it.
Check this for BEST LONG RANGE WIRELESS ROUTERS
Add an Access Point
For a large home using a separate entry point, might help solve the problem. What you need to do is place the 2nd access point where the first one signal is not able to reach. You will place the existing router in your living area and the 2nd one in the cellar.
You will have to join the contact point to the Wi-Fi router. This is done by using a network cable connected to the router to the entry point. You will do this by connecting the LAN port of the entrance point to the LAN port of the router.
The good news is that many routers you can utilize as a right to use point and features in the specification list. When connecting the router you do this via the WAN port and best to use the same brand and model of routers.
Using a Range Extender or Repeater
You can use this equipment to connect to your existing wireless network. What it does rebroadcasts the network signal further. The majority of these wireless devices supports a wireless confined setup and connects to your router with a press of a button. Preceding this, you can place one at the border of your networks wireless range to increase it.
The biggest problem is you need to place the device close up to the current router to get the best connection. However, it also needs to be far enough to broaden the range. This is difficult as finding the right spot to work effectively is not always possible.
The only thing the repeater does is duplicate your existing wireless network with its own. The problem comes where the two groups overlap as it must deal with signal saturation and interference.
Changing the Settings
If you are a novice user, this part might be a bit intimidating and only recommended if you do want to learn about networking. Before you start, it is important to back up your router’s configuration settings. This will help to reinstate it if something happens to go wrong with the previous settings. Furthermore, this depends if your router includes a Web IF (Interface).
- Open up the managing Web page from a connected computer by accessing the IP address. You can find the default Internet Protocol address on the underside of the apparatus or user guide. It normally looks as follow 192.170.x.1.
- If you are not sure, click the start button if you are running Windows 7 or Vista. Add in “cmd” in the search field and press enter. If you are using Windows XP, you need to navigate to the Start Menu and use the Command Prompt item.
- In the command, prompt window input “ipconfig” and press enter. A lot of information will be displayed and you need to find the numbers that follow the “Default Gateway.” This is the Wi-Fi routers IP address.
- Use your browser, type this IP address, and press enter – the Web interface page will come up. Here you will need to log in to your accounts, such as admin and the password you can find in the manual.
Once logged into the Web IF the following helps to keep your home network safe:
- The Network (Router) Name and Password – The majority of routers has a default SSID or wireless network (router) name and code. You can change these settings to your preferred password as the default passwords normally revealed to other advanced users.
- Using the WPA2 Encryption Method – This helps to increase the speed and security of the wireless signal. If you find that, some of the clients cannot connect, change back to Wireless Protected Access (WPA).
- Other Settings – Once accessing the Web interface many routers offer you extra settings such as Internet filtering and MAC address filters. You need to note that any router takes up to a minute when restarting to apply any changes made to it.
Finding the best location to put the wireless router in the home takes loads of trials and errors. We hope that our tips help you to solve your network problem in the home. The important thing to remember is not to place any obstacles in its way and make sure you place in centrally in the home.